VOLTCRAFT V-CHARGE 100 DUO Bedienungsanleitung Seite 75

1 Output #1: LC display and operating buttons
2 Output #2: LC display and operating buttons
3 Illuminated, two-line LC display
4 Button "BATT. TYPE/STOP" for returning from a menu or stopping the charging process
5 "DEC" button for entering values (decreasing value), menu selection (backwards) and dis-
playing various data while charging/discharging
6 "INC" button for entering values (increasing value), menu selection (forward) and displaying
the voltage values of the individual cells when charging lithium batteries with a balancer
connection
7 "START/ENTER" button for starting/continuing the charging process or confirming an ad-
justment/operating function
8 Output #1: Round sockets (4 mm) for rechargeable battery connection (red = plus/+,
black = minus/-)
9 Output #1: Connection socket for enclosed external XH-adapter
10 Output #1: Socket for external temperature sensor (not enclosed, can be ordered sepa-
rately)
11 Output #2: Socket for external temperature sensor (not enclosed, can be ordered sepa-
rately)
12 Output #2: Connection socket for enclosed external XH-adapter
13 Output #2: Round sockets (4 mm) for rechargeable battery connection (red = plus/+, black
= minus/-)
14 Direct voltage input (11 - 18 V/DC, stabilised), e.g. to connect to an external vehicle lead
battery
15 Low-voltage device socket for connecting the charger to the mains voltage
Either operate the charger via the mains voltage connection (1) or the direct voltage
input (9). Never use both inputs at the same time. This may damage the charger.
16 Output #1: Micro-USB socket for PC connection
17 Output #2: Micro-USB socket for PC connection
18 USB voltage/current output (5 V/DC, max. 2.1 A), e.g. to charge a mobile phone or tablet
computer
19 Fan (starts up automatically on demand depending on the charge/discharge program)
75