Read First And Then; Brief Description; Scope Of Supply - Camille Bauer KINAX WT 707 Betriebsanleitung

Operating Instructions
Transmitter for angular position KINAX WT 707
Contents
1. Read first and then... ................................................ 21
2. Brief description ........................................................ 21
3. Scope of supply ........................................................ 21
4. Specification and ordering information ..................... 22
5. Technical data ........................................................... 22
6. Mounting ................................................................... 24
7. Electrical connections ............................................... 24
8. Setting the beginning and end
of the measuring range ............................................. 27
9. Adaptation from 2-wire connection to
3 or 4-wire connection and vice versa ...................... 27
10. Reversing the rotation
for instruments with measuring ranges > 150
11. Spare parts ................................................................ 28
12. Dimensional drawings ............................................... 29

1. Read first and then ...

The proper and safe operation of the device
assumes that the Operating Instructions are
read carefully and the safety warnings given
in the various Sections
6. Mounting
7. Electrical connections
8. Setting the beginning and end
of the measuring range
10. Reversing the rotation for
instruments with measuring
ranges > 150
are observed.
The device should only be handled by
appropriately trained personnel who are
familiar with it and authorised to work in
electrical installations.

2. Brief description

The KINAX WT 707 converts the angular position of a shaft
into a load-independent direct current signal, proportional
to the angular position.
Explosion-proof "Intrinsically safe" versions with I.S.
measuring output rounds off this series of transmitters.

3. Scope of supply

Transmitter, one of the twelve versions (Fig. 1)
1 Operating Instructions (Fig. 3), in three languages:
German, French, English
1 Ex approval (Fig. 3), only for Ex version devices
° ..... 27
°
Fig. 1
Fig. 2
Betriebsanleitung
Messumformer für Drehwinkel KINAX WT 707
Mode d'emploi
convertisseur de mesure
pour angle de rotation KINAX WT 707
Operating manual
Transmitter for angular position KINAX WT 707
WT 707 B d-f-e 993 651 3000-5.95
Aargauerstrasse 7
CH-5610 Wohlen/Switzerland
Telefon +41 56 618 21 11
Telefax +41 56 618 24 58
e-mail: cbag@gmc-instruments.com
Camille Bauer AG
http://www.gmc-instruments.com
21