Selecting An Input Mode - Yamaha ysp-1 Bedienungsanleitung

You can select the type of input signals you want this unit to use.
INPUT VOLUME
+ +
TV INPUT
SLEEP
Press and hold INPUT on the front panel, or
an input selector button on the remote
control.
When you press these buttons, you can confirm the
currently selected input mode. By pressing and
holding them, you can adjust input mode settings.
The setting for VCR is ANALOG.
INPUT
TV
AUTO
DTS
ANALOG

SELECTING AN INPUT MODE

STANDBY/ON
TV MUTE
TV DVD
AUX VCR
or
DVD AUX
AUTO AUTO
DTS DTS
• AUTO
Automatically selects input signals in the following order:
1) Digital signals
2) Analog signals
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability during playback.
Use this input mode when playing DTS-CD or DTS-LD
discs.
• ANALOG
Selects analog signals when both digital and analog
signals are input simultaneously.
y
You can adjust the default input mode this unit selects when the
power is turned on (see page 44).
SELECTING AN INPUT MODE
47