Using A Metal Wall Bracket; Using A Stand; Using A Rack; Affixing This Unit - Yamaha ysp-1 Bedienungsanleitung

INSTALLING THIS UNIT IN YOUR LISTENING ROOM

Using a metal wall bracket

You can use the optional metal wall bracket (SPM-K1) to
mount this system on your listening room wall.
For details on how to attach the metal bracket to the wall
or how to attach this system to the metal bracket, refer to
the instructions supplied with the bracket.
YSP-1

Using a stand

You can mount your TV on a commercially available
stand placed on a rack to install this unit under your TV.
For details on how to attach the stand or how to attach this
system to your TV, refer to the instructions supplied with
the stand.
TV
YSP-1
10
Metal wall bracket
(SPM-K1)
TV
Stand

Using a rack

You can install this system either above or under your TV
in a commercially available rack.
Before installing, make sure that the rack is large enough
to allow adequate ventilation space around this unit, and
that it is strong enough to support the weight of both this
unit and your TV.
When the YSP-1 is
installed above your TV
TV
When the YSP-1 is
installed under your TV

Affixing this unit

To affix this unit, remove the protection pads from the
bottom of the unit, then secure the supplied fasteners (4
pieces) to the bottom four corners of this unit and the top
of the rack, etc. as shown below.
Notes
• Do not install this unit on top of a slanted surface. This unit may
fall over and cause injury.
• Make sure you wipe the surface of the rack, etc. before securing
the fasteners. Appling the tape to a dirty or wet surface will
weaken the sticking power of the tape, and this unit may fall as
a result.
YSP-1
Fasteners
Remove the
protection
pads
Peel off
the film