Beam Menu - Yamaha ysp-1 Bedienungsanleitung

MANUAL SETUP

BEAM MENU

Use to manually adjust settings for the beams output by
this unit.
When you set the options in PARAMETER, related
settings are automatically adjusted to suit your listening
environment.
(SET MENU → MANUAL SETUP → BEAM MENU)
2 BEAM MENU 1/2
. A)PARAMETER
B)BEAM ADJ
C)ROOM EQ
D)BEAM TONE
[ ]/[ ]:Up/Down
[SELECT]:Enter
PARAMETER (Parameter settings)
Use to set the position of this unit in your listening room
and the distance of this unit from the listening position.
A)PARAMETER 1/3
. SP POSITION
;;;;;;WALL
SP HEIGHT
;;;;;;1.0m
[ ]/[ ]:Up/Down
[<]/[>]:Select
SP POSITION (Speaker position)
Use to adjust the installation position of your speakers.
Choices: WALL (wall), CORNER (corner)
Wall installation
(WALL)
SP HEIGHT (Speaker height)
Use to adjust the height of this unit from the floor.
Choices: 0 m to 3.0 m
Initial setting: 1.0 m
YSP-1
Floor
40
Corner installation
(CORNER)
0 m to 3.0 m
ROOM WIDTH (LEFT WALL)
(Width of listening room left wall)
If SP POSITION is set to WALL, use this to set the width
of your listening room.
If SP POSITION is set to CORNER, use this to set the
length of the wall in front and to the left of the listening
position.
When you set the SP POSITION parameter in EASY
SETUP (page 25) or MANUAL SETUP (page 40), this
item is automatically set to the factory default value.
Choices: 2.0 m to 12.0 m
Wall installation
(WALL)
ROOM LENGTH (RIGHT WALL)
(Length of listening room right wall)
If SP POSITION is set to WALL, use this to set the
distance from the speaker to the rear wall of your listening
room.
If SP POSITION is set to CORNER, use this to set the
length of the wall in front and to the right of the listening
position.
When SP POSITION is adjusted in EASY SETUP
(page 25) or MANUAL SETUP (page 40), the factory
default value is automatically set for this parameter.
Choices: 2.0 m to 12.0 m
Wall installation
(WALL)
Corner installation
(CORNER)
Corner installation
(CORNER)