Changing The Hinge Position - Pkm WKS 44A Bedienungsanleitung

10. CHANGING THE HINGE POSITION

We recommend to consult a qualified professional, when you want to
Only carry out the change of the hinge position,
The change of the position must be carried out by at least two persons;
otherwise you may hurt yourself or damage the appliance.
 Cross slot screwdriver
 Flathead screwdriver
 Hexagonal spanner
1. Completely empty the appliance
2. Disconnect the appliance from the mains.
3. Set the adjustable feet to their highest position.
4. You must tilt the appliance backwards to remove the door. Lean the
appliance against a solid construction and block it, so the appliance cannot
slide away while you are working.
5. The appliance must not tip over or lie on one of its sides. Otherwise you
may cause serious damage to the cooling system.
6. Keep all unrigged parts in a safe place.
1. Remove the cover caps on the glass door.
2. Unscrew the door handle and fix it on the opposite side.
change the hinge position
when you are qualified for such a work.
CAUTION!
Tools required:
Preparation
Change
63