Faults; Cleaning - ergoline FLAIR Series Gebrauchsanweisung

03/2017 1006293-03
4.2

Faults

Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.

If several errors occur, the error messages are displayed alternately.

Error elimination is acknowledged by pressing the START/STOP button.

If the error cannot be cleared, inform Customer Service - see page 2.

More detailed information regarding the error description and solutions is
available in 'Error Codes' (order no. 1011804-..).
4.3

Cleaning

DANGER!
Infections can be spread by skin contact!
All objects/device parts, which can come into contact with
the user during tanning, must be disinfected after every
tanning session:
– Acrylic glass panel
– Handles and control panel
– Protective goggles
– MP3 cable
– Adjustable air nozzles
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.
Cleaning and maintenance
Operating instructions – 35/66