Acrylic Glass; Maintenance Plan - ergoline FLAIR Series Gebrauchsanweisung

03/2017 1006293-03
4.5.1

Acrylic glass

WARNING!
Cosmetics may cause cracks to form on the surface!
Over the long-term cosmetics or sunscreens cause damage
(e.g. crack formation on the surface).
– Ensure that cosmetics and sunscreens are removed
before tanning.
The acrylic glass panels for the tanning devices are produced of acrylic glass
developed especially for this application. The acrylics used feature a particu-
larly high UV permeability and resistance, as well as an easy-care, hygienic
surface that is gentle on the skin.
The acrylic glass panels are formed to device-specific shapes in a technically
complex production process. Despite state-of-the-art production know-how,
the presence of minor spots, air bubbles or streaks in the acrylic panels is
unavoidable. In addition, hairline cracks can occur on the acrylic glass panel
during operation.
These occurrences are material-related and are unavoidable in processing.
However, they have no significant effect on use and are therefore not accept-
ed as defects.
Over the course of time the acrylic glass panels becomes more translucent as
a result of usage and must be replaced by customer-service personnel on a
regular basis.
4.6

Maintenance plan

WARNING!
Only use genuine spare parts of the same type! If other
parts are used then the device no longer complies with the
conformity declaration and may not be operated any longer!
Any liability for damage or injury proven to be the result of
the use of non-genuine spare parts is excluded.
Cleaning and maintenance
Operating instructions – 39/66