03/2017
1006293-03
–
Remove the canopy panel with the aid of a helper.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Use the scratch protection.
–
Carefully lay the canopy panel in the guide.
–
Remove fingerprints and other soiling carefully.
4.7.4
Removing the front panel
–
Remove the acrylic glass panel: see page 43.
–
If necessary, remove the screws from the inside.
–
Carefully lift the upper edge of the front panel out of the holder
(pull upwards).
–
Lift the front panel in order to lift it out of the two lower hooks.
–
Then remove the front panel to the front and lay it aside.
Cleaning and maintenance
Operating instructions – 45/66