Cleaning and maintenance
52/66
The assembly is the same process in reverse order.
When assembling the device please note:
–
When positioning the lamp covering push the pins into the opening.
4.10
Cleaning or replacing UV lamps and
filter panels in the canopy
–
Remove the canopy panel: see page 44.
FLAIR 250 SUPER POWER:
–
Remove the 2 lamp covers.
Replacing lamps:
UV low pressure lamps: see page 48.
UV high pressure lamps and filter panels: see page 50.
Replacing starters: see page 49.
FLAIR 200 SUPER POWER:
4 lamp covers must be removed on this device.