Cleaning and maintenance
50/66
4.8.3
High pressure lamps and filter panels
UV high pressure lamps are used in facial tanners.
DANGER!
Danger of burns from hot lamps and surfaces!
Finger and hands may get burned when replacing lamps.
–
Before carrying out maintenance work, wait until the
device has cooled down sufficiently.
Fire hazard due to overheated lamps!
Non-approved high pressure lamps can explode. Hot lamp
components can set other parts on fire. People can be killed
or severely injured due to smoke inhalation and fire.
–
Only fit the high pressure lamps specified by the manu-
facturer.
–
Clean the inside of the device regularly. Dust particles
are flammable!
–
Open the clamps.
–
Lift the filter panel, pull it out of the guide and remove it.
–
Unplug the UV lamps.
–
Clean the reflector.
–
Only utilize original UV lamps.