Navigation - ergoline FLAIR Series Gebrauchsanweisung

03/2017 1006293-03
1. START/STOP button
2. Display – Functions ...
3. Music pictogram
4. Body cooling/facial cooling pictogram
5. Facial tanner pictogram
6. Air conditioning pictogram (only active if air conditioning available)
7. Minus button
8. Left navigation arrow button
9. Plus button
10. Right navigation arrow button
3.3.1

Navigation

The device is operated with the navigation ring.
Switch on UV lamps:
Tip the button once.

Switch off UV lamps/pause tanning:
Hold the button.

Select device function (go to pictogram)
e.g. MUSIC
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the tanning device. After selecting a function,
the respective diodes and the navigation ring flash for a few seconds. Settings
can be changed during this time.
Operation
Operating instructions – 31/66