Faults - ergoline Evolution 500 Gebrauchsanweisung

Please read and observe ...

Faults

1)
In the case of a fault, error codes
calising of the fault cause (see separate manual):
• If a fault occurs, the fault code flashes in the display.
• If several faults occur, the fault messages are displayed alternately.
• On devices with : The text messages on the current fault
messages of the device can be displayed in the fault mode by
pressing the button.
• The fault remedy is acknowledged by pressing the
• If the fault cannot be eliminated, inform Customer Service.
1)Error codes, Order No. 800751
44
appear on the display to simplify lo-
button.