Specifications - WIKA CEP 3000 Betriebsanleitung

3. Specifications

3. Specifications
Base instrument
Display
Display
Input and output
Number and type
Resistance thermometer
(RTD)
Thermocouples
Voltage signal
Resistance
Special features
Resistance thermometer
IEX range
Resistance thermometer
frequency response
Set value input
Functions
Voltage supply
Power supply
Battery life
Battery status indication
Permissible ambient conditions
Operating temperature
Storage temperature
Relative humidity
Case
Material
Ingress protection
Dimensions
Weight
WIKA operating instructions, model CEP3000
2-line with 8 digits and 10 mm high characters
four banana-plug inputs for resistance thermometers and one
thermocouple plug input
Pt100 (385, 3926, 3916), Pt200, Pt500, Pt1000, Ni120, Cu10,
Cu50, Cu100, YSI400
Types J, K, T, E, R, S, B, L, U, N, P
-10 ... +75 mV
0 ... 3,200 Ω
0.01 ... 3 mA
10 ms; works with all pulsed transmitters
nine for each thermocouple type and nine for each resistance
thermometer type
automatic step function, setting of set values for each output
function
4 x 1.5 V AA batteries
30 hours
Icon in display for low battery level
-10 ... +50 °C
-40 ... +60 °C
0 ... 90 % r.H. (non-condensing)
Plastic (with robust protective rubber boot)
IP 52
220.9 x 106.6 x 58.4 mm
approx. 850 g
GB
9