Filling Of The Rinse Aid Container - Pkm DW12A++7 Bedienungsanleitung

1. Remove the lower dish-rack and the lid of the water softener container.
2. When you fill the container for the first time, pour approx. 500 ml water into
the container.
3. Put the equipped funnel in the opening and pour approx. 2 kg water softener
(=dishwasher salt) in the container.
4. Close the lid carefully.
5. The control light for the hardness of water usually goes off after 2-6 days.
You must fill the container when the control light goes on. The control light may
go on although the container is filled unless the water softener has been dissolved.
If you have spilled any water softener when filling the container you can set a
Use a rinse aid which is suitable for a dishwasher only. Never use other
chemical substances, e.g. a dishwasher cleaner or liquid cleaners;
When the rinse aid indicator is not on, the colour of the display device "D"
indicates the needed quantity of rinse aid.
 Dark spot = container filled to capacity.
 The smaller the spot the emptier the container. The container should
be filled not less than 25%.
special programme to wash out the residuals.
C. Filling of the rinse aid container
otherwise you will damage the appliance.
NOTICE!
NOTICE!
49