Safety Instructions; Symbols And Icons; Symbols On The Appliance; Symbols On The Recharger - Parkside RAPIDFIRE Originalbetriebsanleitung

GB IE
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:

Carefully read these Operating In-
structions.
Electrical appliances must not be dis-
posed of with the domestic waste.
Pole orientation
6

Symbols on the recharger:

Warning!
Before using for the first time, care-
fully read through the user manual
The recharger is for indoor use
only.
Pole orientation
Protection class II
Electrical appliances must not be dis-
posed of with the domestic waste.

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.