Safety Instructions; Symbols And Icons - Parkside PBSA 12 B1 Originalbetriebsanleitung

GB MT
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures
to reduce vibration exposure are the
wearing of gloves when using the tool
and limiting the working hours. For this
purpose all parts of the operating cycle
have to be considered (for example,
times when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Electrical appliances must not be
disposed of with the domestic
waste.
Symbols on the battery:
Carefully read these operating in-
structions.
36
Do not subject the battery to strong
sunlight over long periods and do
not leave it on a heater (max. 45°C).
Take batteries to an old battery
collection point where they will
be recycled in an environmentally
friendly manner.
Store the battery in
charged condition
The battery requires an ambient
temperature of +10°C to + 40 °C.
The battery should never come into
contact with water.
Symbols on the recharger:
Warning!
Before using for the fi rst time, care-
fully read through the user manual.
The recharger is for indoor use only.
Miniature fuse
Protection class II (Double insulation)
Electrical appliances must not be dis-
posed of with the domestic waste.
LED display while
charging.
Do not dispose of
batteries in house-
hold waste, fi re or
water.