Safety Instructions; Symbols And Icons - Parkside RAPIDFIRE 2.1 Originalbetriebsanleitung

GB MT
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
54
Symbols on the appliance:
Carefully read these Operating In-
structions.
Do not dispose of the device
with the battery installed in
household waste.
Symbols on the recharger:
Read the operating instructions be-
fore charging.
The recharger is for indoor use
only.
Pole orientation
Protection class II
(Double insulation)
Within the EU, this symbol denotes
that this battery charging device
and battery pack must not be dispo-
sed of with domestic waste. Old de-
vices contain valuable, recyclable
materials which should be recove-
red to protect the environment and
human health from uncontrolled
waste disposal. Please therefore
dispose of old devices via appropri-
ate collection systems, or send the
device for disposal to the company
from which you purchased it. This
company will then pass the device
on for recycling.