PeakTech 1070 Bedienungsanleitung Seite 34

4.7. Temperature measurement
Warning!
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
1. Connect the K-type thermocouple to „V//mA" and „COM" jacks
2. Set the rotary function switch to the "TEMP" position.
3. Connect the thermocouple to the object to be measured.
4. Read the temperature value in °C on the LCD.
Warning!
To avoid electric shock, be sure, that the thermocouple has been
removed before changing to another measurement function.
Note:
By selecting the temperature measuring function (°C), the display
shows a temperature value. This value shows the internal
temperature of the unit and not the ambient temperature.
A correct temperature measurement it only possible, if a suitable
thermocouple is plugged into the input of the unit.
-33-