Maintenance Intervals; Warranty - Kranzle 1+1 Originalbetriebsanleitung

Maintenance

Maintenance intervals

After each use
- Empty and clean dirt hopper.
- Clean the machine.
- Inspect broom bars and sealing lips.
Every 6 months
- Grease axles of track wheels and pinions.
- Check drive belt tensions, re-adjust as required.
Compliance with the maintenance work recommended by Kränzle will make
sure that your machine is ready to operate at any time.
If you are not in a postion to carry out the specified operations yourself, please
contact the nearest Kränzle service partner at www.kraenzle.com under the
heading „Dealers".
Please have your machine number available for all repairs or parts orders.
It is printed on the data plate. The data plate is located at the left bottom
end of the frame.
32

Warranty

Warranty
Our warranty obligation is understood to exclusively cover material and
manufacturing defects; wear is not covered by warranty.
The machine is to be operated in conformity with this Operating manual.
The operating manual is deemed to be part of the warranty provisions.
This warranty shall only apply on condition of proper use of original-Kränzle
component parts and original-Kränzle replacement parts.
With regard to legal warranty claims, the limitation periods of the respective
countries shall apply.
In the event of any warranty claims, please have your accessories and purchase
voucher ready before contacting your local dealer or the nearest authorized
customer service point, which you can also find in the internet under
www.kraenzle.com .
In case of improper operation and non-performed maintenance of the cleaning
machine, subject warranty becomes null and void.
Belts, brushes, gearwheels are wear parts and are not covered by the Warranty
obligation.
GB
33