Herunterladen Inhalt Inhalt Diese Seite drucken

Lights - Kärcher STH 8.66 W Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für STH 8.66 W:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Remove the blockages from the
snail or the discharge shaft
Danger
Risk of injury!
Before doing any work on the machine:
– Switch off engine.
– Wait till all the moving parts have come
to a stand-still.
– Pull out the ignition key and the ignition
plug.
Figure 6, Pos. 4
Remove the blockages using a plastic
plunger or a shovel.

Lights

The headlight will be illuminated while the
motor is running.
Snow chains (optional)
Snow chains can be purchased and used if
the weather conditions are extreme.
Transport
Danger
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
Drive the machine
For maneouvering/ travelling short distances.
Start the appliance.
Select a forward or reverse gear.
Press the clutch lever for travel drive
and keep it depressed.
Drive the machine carefully.
Transport without self-drive
Danger
Risk of injury!
Before doing any work on the machine:
Switch off engine.
Wait till all the moving parts have come
to a stand-still.
Pull out the ignition key and the ignition
plug.
Allow engine to cool down.
Caution
Risk of damage! The transport media used
(such as a transport vehicle, a loading
ramp or similar) must be used as intended.
Empty fuel tank.
Transport the machine on or in a vehi-
cle in the horizontal position.
Secure the machine against slippage or
from rolling off.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
Danger
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Shutdown
Danger
Risk of explosion!
– Smoking and naked flames are strictly
prohibited.
– Ensure that no fuel reaches the hot
open surfaces.
Please follow these instructions if the ma-
chine is not to be used for more than one
month:
Prepare the engine (see "Engine In-
struction Booklet").
Empty fuel tank.
Clean the device.
Wipe all metallic parts with an oily cloth
to protect them against rusting or spray
some oil on them.
Store the machine in a clean and dry
room.
4
-
EN
15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis