Sampling System; Profile Clamp; Lifting Stations; Cover Seal - Kessel Euro G Anleitung Für Einbau, Bedienung Und Wartung

7.4 Sampling system DN 100/150

7.5 Profile clamp

7.6 Lifting station Aqualift F

7.7 Cover seal

7.8 Disposal pump with cutting assembly / macerator - 3.0 kW (NS 2-10)
7. Spare parts and asessories
KESSEL offers a range of different sampling systems for installation in frost-pro-
tected rooms and underground. All the sampling systems are sealed odour-tight
using quick-action clamps.
These sampling systems make it possible to draw waste water samples from the
whole flow cross-section. This allows analyses to be carried out according to DIN
38409, for example. The sampling system must be cleaned before the sample is
drawn.
The installation and execution of sampling systems is not standardised, but is
basically required by DIN 1986 Part 1. Please observe the requirements of local
authorities.
The standard pipe connection for sampling systems is DN 100. Connection to
DN 150 pipes is possible by sawing the muff to fit.
Horizontal outlet
Vertical outlet
Profile clamp Ø 450
KESSEL offers various lifting stations in different versions and capacities which
can be installed upstream or downstream from the separator.
Please note that a double lifting station must be planned downstream from the
grease separator on account of the continual draining.
Nominal
Current connection
capacity
1,1 kW 400 V DS (3-phase)
2,2 kW 400 V DS (3-phase)
Seal Ø
Art. #
915 871
915 870
Art. #
917 004
NS
Art. #
DN 100 28 659
DN 100 28 631
Art. #
917 204
30
419-001