Before Baking; Baking Bread - Silvercrest SBB 850 EDS A1 Bedienungsanleitung

Example:
It is 8:00 a.m. and you would like to have fresh
bread in 7 hours and 30 minutes, in other words
at 3:30 p.m. First of all select Programme 1 and
then press the arrow button
in the display , as the time period to be allowed
for completion is one of 7 hours and 30 minutes.
Note:
The timer function cannot be activated with the
Programme "Jam".
Note:
With time delayed baking please do not use perish-
able ingredients such as milk, eggs, fruit, yoghurt,
onions etc.

Before baking

For a successful baking process, please consider
the following factors:
Ingredients
Note:
Take the baking mould
re putting in the ingredients. Should ingredients
drop into the baking area, a fire may be caused by
them burning on the heating elements.
• Always place ingredients into the baking
mould in the sequence specified .
• All ingedients should be at room temperature,
to ensure an optimal rising result from the yeast.
• Ensure that you measure the ingredients precisely.
Even negligible deviations from the quantities spe-
cified in the recipe may affect the baking results.
until 7:30 appears
out of the housing befo-
Note:
NEVER use quantities larger than those specified. Too
much dough could rise out of the baking mould
drop onto the hot heating elements and cause a fire.

Baking bread

Preparation
Pay heed to the safety instructions in this manual.
Place the Bread Baking Machine on a level and
firm surface.
1. Pull the baking mould
the appliance.
2. Push the kneading paddles
shafts in the baking mould
are firmly in place.
3. Place the ingredients for your recipe into the
baking mould
add the liquids, sugar and salt, then the flour,
adding the yeast as the last ingredient.
Note:
Ensure that the yeast does not come into contact
with salt or fluids.
4. Place the baking mould
Ensure that it engages correctly.
5. Close the appliance lid
6. Insert the power plug into the wall socket.
A signal tone sounds and in the display
appears the Programme number and the time-
duration for Programme 1.
7. Select your programme with the Programme
select button
a signal tone.
- 9 -
upwards and out of
onto the drive
. Make sure they
in the specified order. First
back in the appliance.
.
. Each input is confirmed with