Yamaha RD250 Betriebsanleitung Seite 50

Adjusting the head light beam
Horizontal adjustment:
1. Remove
f
h e screw from the right side
of the headlight body, and remove the
headlight rim.
2. Slightly loosen the headlight body
lock nuts.
3. Loosen the front fork cap bolts.
4. Adjust the beam by moving the head
light body sideways.
A f t e r adjusting, tighten the bolts and
nuts.
Vertical adjustment:
1. Slightly loosen the headlight body
lock nuts.
2. Adjust the beam by moving the head-
light body up and down. A f t e r adjust-
ing, tighten the nuts.
- 4 8 -