StarTech.com IES101002SFP Bedienungsanleitung Seite 91

8.1.7.23 User Add
Security/Switch/SNMP>User Add ?
Description:
Add SNMPv3 user entry.
The entry index key are <engineid> and <user_name> and it doesn't allow modify.
Syntax:
Security Switch SNMP User Add <engineid> <user_name> [MD5|SHA]
[<auth_password>] [DES] [<priv_password>]
Parameters:
<engineid>
<user_name>
md5
sha
<auth_password>
des
<priv_password>
Instruction Manual
91
Engine ID, the format may not be all zeros or all 'ff'H
and is restricted to 5 - 32 octet string
A string identifying the user name that this entry should
belong to. The name of "None" is reserved.
The allowed string length is (1-32), and the allowed content
is ASCII characters from 33 to 126
An optional flag to indicate that this user using MD5
authentication protocol. The allowed length is (8-32),
and the allowed content is ASCII characters from 33 to 126
An optional flag to indicate that this user using SHA
authentication protocol. The allowed length is (8-40),
and the allowed content is ASCII characters from 33 to 126
A string identifying the authentication pass phrase
An optional flag to indicate that this user using DES privacy
protocol privacy protocol should belong to.
The allowed string length is (8-32), and the allowed content
is ASCII characters from 33 to 126
A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content
is ASCII characters from 33 to 126