Inhaltsverzeichnis
Werbung
8.2.3.11 Guest_VLAN
Security/Network/NAS>Guest_VLAN ?
Description:
Set or show either global state and parameters (use the global keyword) or per-port state of
Guest VLAN
Unless the 'global' keyword is used, the <reauth_max> and <allow_if_eapol_seen>
parameters will not be unused..
Syntax:
Security Network NAS Guest_VLAN [global|<port_list>] [enable|disable] [<vid>]
Parameters:
global
<port_list>
(default: Show current per-port Guest VLAN state)
enable|disable
disable: Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN state)
<vid>
(default: Show current Guest VLAN ID)
<reauth_max>
(default: Show current Maximum Reauth Count value
<allow_if_eapol_seen>
Disable
enable
Instruction Manual
120
[<reauth_max>] [<allow_if_eapol_seen>]
Select the global Guest VLAN setting
Select the per-port Guest VLAN setting
enable : Enable Guest VLAN either globally or on one or more ports
Guest VLAN ID used when entering the Guest VLAN. Use the
'global' keyword to change it
The value can only be set if you use the 'global' keyword in the
beginning of the command.
The number of times a Request Identity EAPOL frame is sent
without response before considering entering the Guest VLAN
The value can only be set if you use the 'global'
keyword in the beginning of the command.
The Guest VLAN can only be entered if no EAPOL frames have
been received on a port for the lifetime of the port
The Guest VLAN can be entered even if an EAPOL frame has
Werbung
Inhaltsverzeichnis
