Ipv6 State; Ntp Configuration - StarTech.com IES101002SFP Bedienungsanleitung

3.9 IPv6 State

IP>IPv6 State ?
Description:
Set or show the IPv6 Interface operational state.
Syntax:
IP IPv6 State <ipv6_addr> [enable|disable]
Parameters:
<ipv6_addr> IPv6 address is in 128-bit records represented as eight fields
of up to four hexadecimal digits with a colon separates each
field (:). For example, four hexadecimal digits with a colon
separates each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing
multiple 16-bit groups of contiguous zeros; but it can only
appear once. It also used a following legally IPv4 address.
For example,'::192.1.2.34'.
enable Enable the designated IPv6 Interface
disable Disable the designated IPv6 Interface

3.10 NTP Configuration

IP>NTP Configuration ?
Description:
Show NTP configuration.
Syntax:
Instruction Manual
33