(default: Show SNMP mode)
8.1.7.3 Version
Security/Switch/SNMP>Version ?
Description:
Set or show the SNMP protocol version.
Syntax:
Security Switch SNMP Version [1|2c|3]
Parameters:
1
SNMP version 1
2c
SNMP version 2c
3
SNMP version 3
(default: Show SNMP version)
8.1.7.4 Read Community
Security/Switch/SNMP>Read Community ?
Description:
Set or show the community string for SNMP read access.
Syntax:
Security Switch SNMP Read Community [<community>]
Parameters:
<community>: Community string. Use 'clear' or "" to clear the string
Maximum length allowed is upto 256 characters.
(default: Show SNMP read community)
Instruction Manual
81