StarTech.com IES101002SFP Bedienungsanleitung Seite 85

appear once. It also used a following legally IPv4 address.
For example,'::192.1.2.34'.
8.1.7.11 Trap Authentication Failure
Security/Switch/SNMP>Trap Authentication Failure ?
Description:
Set or show the SNMP authentication failure trap mode.
Syntax:
Security Switch SNMP Trap Authentication Failure [enable|disable]
Parameters:
enable Enable SNMP trap authentication failure
disable Disable SNMP trap authentication failure
(default: Show SNMP trap authentication failure mode)
8.1.7.12 Trap Link-up
Security/Switch/SNMP>Trap Link-up ?
Description:
Set or show the port link-up and link-down trap mode.
Syntax:
Security Switch SNMP Trap Link-up [enable|disable]
Parameters:
Enable Enable SNMP trap link-up and link-down
Disable Disable SNMP trap link-up and link-down
(default: Show SNMP trap link-up and link-down mode)
Instruction Manual
85