Dscp Map; Dscp Translation - StarTech.com IES101002SFP Bedienungsanleitung

17.27 DSCP Map

QoS>DSCP Map ?
Description:
Set or show DSCP mapping table.
This table is used to map QoS class and DP level based on DSCP value.
DSCP value used to map QoS class and DPL is either translated DSCP
value or incoming frame DSCP value.
Syntax:
QoS DSCP Map [<dscp_list>] [<class>] [<dpl>]
Parameters:
<dscp_list>
(default: Show DSCP ingress map table i.e. DSCP->(class, DPL))
<class>
<dpl>

17.28 DSCP Translation

QoS>DSCP Translation ?
Description:
Set or show global ingress DSCP translation table.
If port DSCP translation is enabled, translation table is used to
translate incoming frames DSCP value and translated value is used
to map QoS class and DP level.
Syntax:
QoS DSCP Translation [<dscp_list>] [<trans_dscp>]
Instruction Manual
210
DSCP (0-63 list or 'all'
QoS class (0-7)
Drop Precedence Level (0-1)