Coordinates - StarTech.com IES101002SFP Bedienungsanleitung

13.7 Coordinates

LLDPMED>Coordinates ?
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [<tude_type>] [<direction>] [coordinate_value]
Parameters:
<tude_type>
latitude
Longitude
altitude
<direction>
North
South
West
East
Meters
Floor
coordinate_value
Instruction Manual
183
The tude_type parameter takes the following values:
Latitude, 0 to 90 degrees with max. 4 digits (Positive numbers are
north of the equator and negative numbers are south of the equator).
Longitude, 0 to 180 degrees with max. 4 digits (Positive values are
East of the prime meridian and negative numbers are West of the
prime meridian).
Altitude, -32767 to 32767 Meters or floors with max. 4 digits.
The direction parameter takes the following values:
North (Valid for latitude)
South (Valid for latitude)
West (Valid for longitude)
East (Valid for longitude)
Meters (Valid for altitude)
Floor (Valid for altitude)
Coordinate value