Storm Unicast; Storm Multicast - StarTech.com IES101002SFP Bedienungsanleitung

Parameters:
<dscp_list>
<dpl_list>
<dscp>

17.33 Storm Unicast

QoS>Storm Unicast ?
Description:
Set or show the unicast storm rate limiter.
The limiter will only affect flooded frames,
i.e. frames with a (VLAN ID, DMAC) pair not present in the MAC Address table.
Syntax:
QoS Storm Unicast [enable|disable] [<packet_rate>]
Parameters:
enable : Enable unicast storm control
disable : Disable unicast storm control
<packet_rate>: Rate in fps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)

17.34 Storm Multicast

QoS>Storm Multicast ?
Description:
Set or show the multicast storm rate limiter.
The limiter will only affect flooded frames,
i.e. frames with a (VLAN ID, DMAC) pair not present in the MAC Address table.
Syntax:
QoS Storm Multicast [enable|disable] [<packet_rate>]
Instruction Manual
214
DSCP (0-63) list or 'all'
DP level list or 'all', default: All DP levels (0-1)
Egress remapped DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43