Setup; Ping - StarTech.com IES101002SFP Bedienungsanleitung

3.3 Setup

IP>setup ?
Description:
Set or show the IP setup.
Syntax:
IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Parameters:
<ip_addr> : IP address (a.b.c.d), default: Show IP address
<ip_mask> : IPv4 subnet mask (a.b.c.d), default: Show IPv4 mask
<ip_router>: IPv4 router (a.b.c.d), default: Show IPv4 router
<vid> : VLAN ID (1-4095), default: Show VLAN ID

3.4 Ping

IP>Ping ?
Description:
Ping IP address (ICMP echo).
Syntax:
IP Ping <ip_addr_string> [(Length <ping_length>)] [(Count <ping_count>)] [(Interval
Parameters:
<ip_addr_string>
length
<ping_length>
count
<ping_count>
Instruction Manual
29
<ping_interval>)]
IPv4 host address (a.b.c.d) or a host name string
PING Length keyword
Ping ICMP data length (2-1452; Default is 56), excluding MAC,
IP and ICMP headers
PING Count keyword
Transmit ECHO_REQUEST packet count (1-60; Default is 5)