Inhaltsverzeichnis
Werbung
26.3 FlowSampler
sFlow>FlowSampler ?
Description:
Set or show flow sampler configuration per port.
When operational,the sampling rate 'N' is rounded off to the nearest supported value.
Syntax:
sFlow FlowSampler [<port_list>] [<sampling_rate>] [<max_hdr_size>]
Parameters:
<port_list>
Port list or 'all'. Default: All ports.
<sampling_rate> Specifies the statistical sampling rate
The sample rate is specified as N to sample 1/Nth of the packets
in the monitored flows. There are no restrictions on the value,
but the switch will adjust it to the closest possible sampling rate.
0 disables sampling.
<max_hdr_size> Specifies the maximum number of bytes to transmit per flow sample.
Valid range is 14 - 200 bytes. Default: 128 bytes.
Instruction Manual
270
Werbung
Inhaltsverzeichnis
