G&D ControlCenter-Digital-80 Installationsanleitung Seite 56

Expanding switchable signals
How to change the bus address of a matrix switch:
1. Start the web application
manual).
2. Click on
KVM Matrix systems > [Name] > Matrix switches
3. Right-click the matrix switch and click the
menu.
4. Choose
System
5. Choose
Bus address
primary:
satellite 1 ... 9:
6. Press to close the window.
OK
22 · G&D ControlCenter-Digital-80
Config Panel
and press .
Enter
and select one of the following options:
The central module is operated by the user.
It switches the satellite matrix switches automatically.
Assign the addresses continuously to the individual stacking
matrix switches.
and log in to your user account (see separate
in the tree view.
Configuration entry on the context