Deleting A Channel Group - G&D ControlCenter-Digital-80 Installationsanleitung

Expanding switchable signals
The display shows the current configuration. The left column (
the matrix switch modules you can add to the channel group.
NOTE:
You can assign up to seven additional video channels and a USB or
RS232 channel to a computer's or a console's KVM channel.
5. Add more modules to or delete them from the channel group:
Adding modules:
Deleting modules:
6. Click OK to save the new channel group.
NOTE: The user and computer modules included in the channel group are
marked with a plus sign in the list of modules.
Click the plus sign to view the list of modules.

Deleting a channel group

How to delete a multichannel configuration:
1. Start the web application
manual).
2. In the directory tree, click
3. Right-click a user or computer module you want to delete from a channel group.
4. On the context menu, click
The current configuration is shown.
NOTE: The web application deletes a channel group if it does not contain any
other channels than KVM channel 1.
5. In the right column (
channels or to the USB/RS232 channel.
Click (arrow left) to delete the module's assignment.
6. Repeat step 4 to delete the assignment of other modules.
7. Click OK if only one module is left assigned to KVM channel 1.
The channel group is deleted.
20 · G&D ControlCenter-Digital-80
 In the left column (
want to add. In the right column (
channel to which you want to add the module to.
 Click (arrow right) to assign the module to the
chosen channel.
 In the right column (
want to delete from the channel group.
 Click (arrow left) to delete the module's assign-
ment.
Config Panel and log in to your user account (see separate
KVM matrix systems > [Name] > DVI-CONs
Channel group
), click a module that is assigned to one of the 2 to 8
Assigned
), click the module you
Unassigned
), click the module you
Assigned
.
) lists
Not assigned
Assigned ) click the
or DVI-CPUs .