G&D ControlCenter-Digital-80 Installationsanleitung Seite 36

Safety instructions
Special instruction for dealing with laser technology
The devices of the ControlCenter-Digital series use components with laser tech-
Fiber
nology which comply with laser class 1.
They meet the requirements according to
and .
1040.11
Class 1 Laser Product
EN 60825-1:2014
Mind the following instructions when dealing with laser beams:
! Avoid eye contact with invisible laser beam
Do not look directly into the beam using optical instruments.
! Always connect optical connections or cover them with protection caps
When not in use, optical connections of the Transmission sockets as well as cable
plugs must always be covered with a connector or a protection cap.
! Only use G&D certified transmission modules
It is not permitted to use fibre optic modules, which do not meet the requirements
of laser class 1 in accordance to
compliance with regulations and advices for the safe handling of laser technol-
ogy cannot be guaranteed.
The guarantee of complying with all relevant instructions can only be given by
applying original components. The devices must therefore only be operated
G&D certified transmission modules.
2 · G&D ControlCenter-Digital-80
EN 60825-1:2014
Invisible laser beam, avoid
direct eye exposure with opti-
cal instruments
EN 60825-1:2014
as well as U.S. CFR 1040.10
Complies with 21 CFR
1040.10 and 1040.11
. By using such modules, the