Cleaning And Maintenance; Cleaning; Maintenance; Storage - Parkside PHD 100 E2 Originalbetriebsanleitung

• To do so, press both bolts (16) down-
wards. The wheels are now no longer
able to turn.
• To cancel the wheel fixing, push the
two bolts (16) upwards.
Cleaning and

Maintenance

Pull out the power plug before
every maintenance operation. There
is a risk of electrocution or of injury
from moving parts.

Cleaning

Never direct the water jet
against the washer, nor clean
the washer under flowing
water. This could give rise to
the danger of electric shock
and damage the washer! .
Always keep the washer clean. Do
not use any detergents or solvents.
• Always keep the ventilation slots clean
and free.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
• In case a nozzle of the jet tube (
12/13) is clogged up, use the nozzle
cleaning pin (
ject from the nozzle.
If necessary, take off the water con-
E
nection with the filter insert (9) and
clean the filter insert.
Maintenance
The pressure washer is maintenance free.
A
7) to remove the ob-
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.

Storage

• Drain all the water from the pressure
washer. Disconnect the unit from the
water supply. Press the On/Off switch
A
( 5) to turn on the pressure washer
for no longer than 1 minute until no
more water escapes from the high-
pressure connection (
unit.
• Wind up the mains cable.
• Protect the pressure washer and its ac-
cessories from frost when they have not
been completely drained of all water.
• Store the pressure washer and its ac-
cessories in a frost-free room.
• To transport or put away the equip-
ment, use only the carrying handle.
• Store the equipment only in a horizon-
tal position in order to protect it from
any damage.
Waste Disposal and En-
vironmental Protection
Be environmentally friendly. Return the
A
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electric appliances should not be dis-
posed of in the domestic garbage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
We can carry out a waste disposal of your
device free of charge.
GB
A
3). Turn off the
11