Display Indicators And Symbols - VOLTCRAFT ET-200 Bedienungsanleitung

8. DISPLAY INDICATORS AND SYMBOLS

OFF
Continuity, CON
Insulation
EXT
PI
DAR
TRUE RMS
ZERO
SAVE
RECALL
rECA
FUL
CLR
CLEAR
TEST
>
COMP
NG
PASS
LOCK
TIME
15s, 30s, 60s,
1min, 10min
46
Switch position "Off", device switches off
Continuity testing
Insulation measurement (insulation resistance)
Warning display for external voltage
Calculation of the polarization index
Calculation of the dielectric absorption rate
Actual effective value measurement
Zeroing for the low-ohm measuring range "Ω"
Internal memory cells (max. 99), save measured value
Read measured value from memory
Memory display is activated
All 99 memory cells are occupied
All memory cells are free
Delete memory cells
Button for triggering measurement, display of the active insulation
measurement
Greater-than sign
Activates the comparison function with good/bad display
Symbol for bad display (NG = Not Good)
Symbol for good display
Switch long-term measurement function on and off
Long-term measurement function is active
Preselect times for time-controlled measurement function
Time display in seconds
Time display in minutes