Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b) Test Mode
• Press the test key (3) and hold it down during the test period.
• Place the test tip by the object that you wish to test.
• The test tip (2) flashes when a magnetic field has been detected. If the display lightens up
briefly, this might be caused by adjoining components.
• When the test key is released, the tester is turned off.
c) LED Torch
• Press the switch (5) until it clicks into place. The LED lamp (6) on the back of the tester
lights.
• To turn off, press the switch again. The lamp is turned off.
• Always switch off the LED lamp after use, otherwise the batteries are discharged too soon.
Care and Cleaning
• The tester is maintenance-free, apart from the need to replace the batteries and occasional
cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
• Periodically, check the technical safety of the tester.
• Do not try to open the casing, apart from the battery compartment.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
b) (Rechargeable) Batteries
You as the end user are required by law (Battery Ordinance) to return all used (re-
chargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Input voltage / current ............................. 2 x alkaline micro batteries (AAA)
Power consumption ................................ approx. 32 mA
Protection class ...................................... 2 (double or reinforced insulation)
Magnetic fields ........................................ AC, DC (also permanent magnets)
Detectable inductance (H = Henry) ........ 63 H, 98 H, 401 H, 810 H
Operating conditions ............................... -10 to +50 °C, <95% RH (non-condensing)
Storage conditions .................................. -10 to +50 °C
Operating altitude ................................... max. 3000 m
Weight .................................................... 48 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2181382_v1_0920_02_mxs_m_en
Werbung
Inhaltsverzeichnis
