Product Overview; Safety; Safety Definitions; General Power Tool Safety Warnings - Meec Tools 018633 Bedienungsanleitung

Wear eye protection.
Wear ear protection.
Wear breathing mask.
Wear safety gloves.
This product complies with applicable
EU directives and regulations.
Recycle as electrical waste.

1.4 Product overview

Figure 1
1. Auxiliary handle
2. Spindle lock button
3. Disc guard
4. Power switch
5. Safety switch
6. Main handle
7. Motor
8. Spindle shaft
9. Inner flange
10. Outer flange
2

Safety

2.1

Safety definitions

WARNING! If you do not obey these instructions,
there is a risk of death or injury.
CAUTION! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
NOTE! Information that is necessary in a given situation.
2.2 General power tool safety
warnings
WARNING! If you do not obey these instructions,
there is a risk of death or injury.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
WARNING! Save all warnings and instructions for
future reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

2.3 Work area safety

● Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
● Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
● Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.

2.4 Electrical safety

● Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
● Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
● Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
● Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
● When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
EN
SV
NO
DA
PL
DE
FI
FR
NL
9