Personal Safety; Power Tool Use And Care; Service; Safety Instructions For Operations Safety Warnings For All Operations - Meec Tools 018633 Bedienungsanleitung

● If operating a power tool in a damp location is
EN
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
SV

2.5 Personal safety

NO
● Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
DA
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
PL
● Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
DE
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
FI
● Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
FR
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
NL
● Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
● Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
● Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
● If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
● Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.

2.6 Power tool use and care

● Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
● Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
10
● Disconnect the plug from the power source and/or
the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
● Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
● Maintain power tools and accessories. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
● Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
● Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
● Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.

2.7 Service

● Have your power toll serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
3 Safety instructions for
operations
3.1 Safety warnings for all
operations
● This power tool is intended to function as a
grinder, or cut-off tool. Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
fire or serious injury.
● Do not convert this power tool to operate in a way
which is not specifically designed and specified by
the tool manufacturer. Such a conversion may result
in a loss of control and cause serious personal injury.