Steelcase Flex Collection HAD Bedienungsanleitung Seite 48

5 Operating and adjusting
Resetting to factory settings
Limit height adjustability - set
These settings can limit the desktop movement range (e.g. if
there is a rolling file cabinet under the desk or a set of shelves
above it). The stopping positions for the rolling file cabinet
become the new lowermost end position, and the shelf
stopping positions become the new uppermost end position.
EN
Limit height adjustability - delete
To delete the movement range limitation of the desktop,
proceed as follows:
5.3 Repositioning the desk
The Flex Collection HAD can be moved by the user at any
time by pushing it.
48
button down until the control clicks again after 5
seconds.
ü The desktop has now been reset to the factory
settings.
3. Please perform a manual reset now.
1. Move the desktop to the lower half or the upper half
of the movement range.
2. Press the "Function button" (on the underside of
the casing).
=
The controller confirms with a "click-clack" sound.
1. Press the "Lever" downwards until the desk stops
automatically or reaches the stop.
2. Press the "Function button" (on the underside of
the casing).
=
The controller confirms with a "click-clack" sound.