Steelcase Flex Collection HAD Bedienungsanleitung Seite 32

5 Operating and adjusting
NOTE
Risk of damage to the control panel!
Ensure that the connecting cables of all devices on
the desk are long enough.
5.2 Table height adjustment
The height of the Flex Collection HAD is adjusted by an
electromotive stepless lifting process.
EN
Ergonomics: Optimum desk height
The adjustment to the optimum desk height (sitting height) is
crucial for the correct sitting posture at the workstation. The
correct desk height setting for the workstation can be found in
the workstation analysis (pursuant to the German Occu-
pational Safety and Health Act, the German VDU Workplace
Ordinance, or accident prevention regulations, for example).
See also
stations: Design guidelines"
table/work surface.
5.2.1 Electrical height adjustment of Lift 2
The Flex Collection HAD product can be variably adjusted
by means of an electric motor to a height of between 650 mm
and 1250 mm.
Before first use, ensure that:
32
}
Do not lean on the control panel.
}
Do not place any objects on the control panel.
}
Do not pour liquids over the control panel.
DGUV Information 215-410 "Screen and office work-
from page 51, section 8.3.1 Work