Steelcase Flex Collection HAD Bedienungsanleitung Seite 47

Paddle Up/Down with LED (PUI04)
Height adjustment
1. Pull or press the "Control lever" to reach the
desired desk height.
=
The desktop moves up or down. The lever is
illuminated as long as it is pressed.
2. Releasing the "Control lever".
ü The desktop stops at the required position.
Manual reset of desktop
Wait for 5 seconds if the desk has just been connected to the
mains.
1. Press and hold the "Down" control lever.
=
The lower end position is reached.
2. Release the "Down" control lever.
=
The desk moves to minimum position; the reset and
initialisation process starts.
ü Reset and initialisation process is completed.
Releasing the control panel before the process is
completed will interrupt the manual resetting process
and it must be started anew.
Resetting to factory settings
Please note that all personal settings and memory positions
will be deleted and reset to factory settings.
1. Press the "Function button" (on the underside of
the casing) for 10 seconds.
2. After 5 seconds the controller clicks once. Hold the
5 Operating and adjusting
EN
47