Steelcase Flex Collection HAD Bedienungsanleitung Seite 34

5 Operating and adjusting
Controller Simple Up/Down (PUI01)
Height adjustment
EN
Manual reset of desktop
Wait for 5 seconds if the desk has just been connected to the
mains.
34
1. Press the appropriate "Up or Down" button to
reach the desired desk height.
=
The desktop moves up or down.
2. Release the "Up or Down" button.
ü The desktop stops at the required position.
1. Press and hold the "Down" button.
=
The lower end position is reached.
2. Release the "Down" button.
=
The desk moves to the minimum position; the reset
and initialisation process starts.
ü Reset and initialisation process is completed.