Steelcase Flex Collection HAD Bedienungsanleitung Seite 35

Releasing the control panel before the process is
completed will interrupt the manual resetting process
and it must be started anew.
Limit height adjustability - set
These settings can limit the desktop movement range (e.g. if
there is a rolling file cabinet under the desk or a set of shelves
above it). The stopping positions for the rolling file cabinet
become the new lowermost end position, and the shelf
stopping positions become the new uppermost end position.
1. Move the table to the required position
2. Press the "Down" and "Up" buttons at the same
time.
=
The controller confirms with a "click-clack" sound.
Limit height adjustability - delete
To delete the movement range limitation of the desktop,
proceed as follows:
1. Press and hold the "Down" button. Table stops auto-
matically.
2. Press the "Down" and "Up" buttons at the same
time.
=
The controller confirms with a "click-clack" sound.
5.2.3 Controller Programmable with Display (PUI02)
The control panel is located on the right-hand side, on the
underside of the desktop. Four different memory positions can
be entered using this control panel.
5 Operating and adjusting
EN
35