Steelcase Flex Collection HAD Bedienungsanleitung Seite 43

Resetting to factory settings
4. The display indicates "000".
5. Press the "Steelcase" button again to confirm.
ü The desktop has now been reset to the factory
settings and the menu is automatically exited. C 38
is displayed.
6. Please perform a manual reset now.
Calling up the menu
The comfort manual switch offers various setting options that
can be made by the operator.
1. Press the "Steelcase" button for 6 seconds and
then release the button.
=
F 1 appears on the display and the menu opens.
2. Navigate in the menu with the "Up" and "Down"
buttons.
Menu structure:
F 1 - Change height indication (CM / INCH).
F 2 - Adjust height indication.
F 3 - Reset to factory settings.
F 4 - Shelf and container- set stop.
F 5 - Shelf and container- delete stops.
3. Press the "Steelcase" button again to access a
submenu.
ü The corresponding submenu opens and further
settings can be made. Please note the following
options!
Change displayed height unit – CM / INCH
The height can be displayed in centimetres or inches on the
5 Operating and adjusting
EN
43