Steelcase Flex Collection HAD Bedienungsanleitung Seite 37

Releasing the control panel before the process is
completed will interrupt the manual resetting process
and it must be started anew.
Resetting to factory settings
1. Press and hold the "Steelcase" button for 6
seconds.
=
F 1 appears on the display.
1. Press and hold the "Down" or Up" button to access
menu item 3.
2. The display indicates F3.
3. Press the "Steelcase" button.
4. The display indicates "000".
5. Press the "Steelcase" button again to confirm.
ü The desktop has now been reset to the factory
settings and the menu is automatically exited. C 38
is displayed.
6. Please perform a manual reset now.
Configuring memory positions
1. Press the "Up" or "Down" button until the desired
height is reached.
=
The display indicates the desk height (e.g. 73 cm).
2. Press the "Steelcase" button.
=
P_ appears on the display.
3. Press the required "Memory position button"
(buttons 1 - 4) (e.g. button "2").
=
The display indicates P 2.
ü The display indicates the desk height after roughly 2
seconds.
5 Operating and adjusting
EN
37