Tool Set Up - Vevor 9926 Bedienungsanleitung

Read the Entire Important Safety Information section at the
beginning of this manual including all text under subheadings
therein before set up or use of this product.

Tool Set up

off-position and unplug the tool from its electrical outlet before performing
any procedure in this section.
1. Secure the Dust Bag to the tool.
2. Before use, make sure that the Sanding Belt is on-center. To check this,
plug in the Sander and hold the Belt clear while carefully turning it on. If the
Belt moves to one side or the other during use, turn the Tracking Knob until
it stays on-center.
OPERATING INSTRUCTIONS
To Prevent Serious Injury From Accidental
Operation: Make sure that the trigger is in the
- 12 -